|
| | | I
GDS¡ª1 Type Advanced Electric System Experimental Equipment£º | | Product
Collocation£º
Basic Collocation |
No | Part
Name | Code | Remark |
1 | experiment
table | | New
Disign | 2 | power
supply master screen | GDS-01A | New
Disign | 3 | voltage
regulating, current regulating source | GDS-03 | Same
as GDS-2 | 4 | signal
source, fixed power supply | GDS-04A | New
Disign | 5 | DC
circuit load | GDS-06A | Same
as GDS-2 | 6 | dynamic
component unit | GDS-06B | Same
as GDS-2 | 7 | precision
load | GDS-07A | New
Disign | 8 | three-phase
light load | GDS-08 | Same
as GDS-2 | 9 | fluorescent
lights, variable capacitor | GDS-09 | Same
as GDS-2 | 10 | DC
voltammeter, AC voltmeter and current meter | GDS-17 | collected
in a hang box, New Disign | Optional
Parts | 1 | power
meter, power factor meter | GDS-13 | Same
as GDS-2 | 2 | controlled
source | GDS-14 | Same
as GDS-2 | 3 | relay
contract box | GDS-15 | Same
as GDS-2 | 4 | relay
contract experiment unit I | GDS-15A | machine
tool electric experiment unit, new design |
5 | relay contract experiment
unit II | GDS-15B |
6 | relay contract experiment
unit III | GDS-15C | | Product
Technical Features£º
GDS-1 type advanced electric
system is a new generation of electric experiment equipment. It has beautiful
whole outer shape, compact structure, and is able to accomplish all experiments
of electric elements. With multiply experiment protection functions.
The whole
protection system uses current type creepage protection in the primary side of
insulation transformer and voltage type in assistant side.
All working power
supply is insolated from network voltage.
Master power supply uses breaker
to switch power supply. Lead-in power supply cut off when over current occurs.
Key
on-off to control system power supply, facilitating lab management. | Main
Technical Index£º
Working power supply£ºthree-phase four-wire 380V AC power supply,
frequency 50HZ
Power of input power supply£º1.5KVA
Dimension of the whole
set£ºLength1500¡ÁWidth700¡ÁHeight1500£¨Unit£ºmm£© |
| II
GDS¡ª3 Type Advanced Electric System Experiment Equipment£º | Product
Allocation£º
Basic Allocation |
No | Code | Part
Name | Remark |
1 | | Experiment
Table | Iron Injection Structure |
2 | | Experiment
Table | Iron Injection Structure |
3 | power
supply master screen | GDS-01B£¨with alarming recording
meter£© | Same as GDS-2 |
4 | voltage regulating
source | GDS-02B | All
New Design | 5 | voltage
regulating, current regulating source | GDS-03B | All
New Design | 6 | signal
source | GDS-04B | All
New Design | 7 | DC
circuit load | GDS-06A | Same
as GDS-2 | 8 | dynamic
components | GDS-06B | Same
as GDS-2 | 9 | intelligent
precision load | GDS-07 | Same
as GDS-2 | 10 | three-phase
light load | GDS-08 | Same
as GDS-2 | 11 | fluorescent
lights, variable capacitor | GDS-09 | Same
as GDS-2 | 12 | DC
voltammeter | GDS-10 | Same
as GDS-2 | 13 | AC
voltmeter | GDS-11 | Same
as GDS-2 | 14 | AC
current meter | GDS-12 | Same
as GDS-2 | 15 | power
meter | GDS-13 | Same
as GDS-2 | 16 | broad
band voltmeter | GDS-23 | Same
as GDS-2 | 17 | controlled
source | GDS-14 | Same
as GDS-2 | 18 | relay
contract box | GDS-15 | Same
as GDS-2 | | Product Technical
Characteristics£º
Use GDS-2 the whole pattern of Advanced Electronic System
Experimental Equipment, dimension and size is completely compatible, all parts
able to replaced by one or another. Use the latest DG-X development achievement
of digital control and routinized control and give forceful hardware support to
computer assistant mathematics software. At the same time, it's more credible
and perfect on aspect of equipment self-protection. And also accord with demands
of education market development .
General Characteristics£º
GDS-3
type advanced electric system is a new generation of electric experiment equipment.
It has beautiful whole outer shape, compact structure, and is able to accomplish
all experiments of electric elements. With multiply experiment protection functions.
The
whole protection system uses current type creepage protection in the primary side
of insulation transformer and voltage type in assistant side.
All working
power supply is insolated from network voltage.
Master power supply uses breaker
to switch power supply. Lead-in power supply cut off when over current occurs.
Key
on-off to control system power supply, facilitating lab management.
With
computer communication function, all measuring meters£¨self-made£©connected with
the computer through serial port communication.
All voltage source, current
source, signal source and AC voltage regulating power supply etc use digital control
and have computer communication functions.
All measuring meters have digital
control and programme control functions and also computer communication functions.
More
perfect and credible on aspect of system self-protection, especially with high-
and low-voltage power supply serial connection added to, it's in accord with requirements
of open labs. | Main Technical Index£º
Working power
supply£ºthree-phase four-wire 380V AC power supply, frequency 50HZ
Power of
input power supply£º1.5KVA
Dimension of the whole set£ºLength1500¡ÁWidth700¡ÁHeight1500£¨Unit£ºmm£© |
| III
DG-X Advanced Electric & Electronic Synthetical Experimental System£º | | DG-X
Comprehensive Experiment Equipment of Modern Electrical and Electronic
Engineering is the newest special equipment in open laboratory, co-developed by
our company and College of Electrical Engineering of Zhejiang University. It has
the advantages of beautiful configuration and compact structure and it employs
several patent technologies. Integrating with several years experience in producing
special education experiment equipment, main control screen and each functional
component is delicately designed. By selecting relevant experiment module, it
can accomplish the experiment course of Electrical Fundamental, Electrical Technique,
Relay Control, Analog Electronic Technique, Digital Electronic Technique, Motor
Pull, Motor Control, Power Electronics. | Product
Characteristics £º
Perfect self-protection technology,
experiments safer£»advanced digital control technology and more powerful functions£º
Aiming
at requirements of experimental equipment meeting challenge of open experiments,
DG-X series electric & electronic synthetical experimental system has powerful
functions of self-protection. With lead-in wire creepage and output creepage protection,
lead-in wire over load and output over load protection function to conduct all-round
protection towards experimental equipments and experimental personnel. Signal
system, power supply system and meter system all have powerful ability of anti
electric impact, able to tolerate error serial connection of power supplies of
different levels and different sorts. Advanced perfect protection technology enables
equipments to be in accordance with requirements of open experiments and devoid
of expensive maintenance fee.
1£®The whole protection system uses current type
creepage protection on the primary side of insulating transformer and voltage
type creepage protection on assistant side. When voltage between outer skull of
experimental equipment and the zero line£¨zero line of the on-ground system£©is
more than 36V, voltage type creepage protection system takes effects and gives
alarming signals automatically and cuts off master power supply. When experimental
equipment has current creepage£¨creepage in deed£©towards the ground£¨the actual
ground£©, current type of creepage protection system of the equipment takes effects,
cutting off input power supply and assuring experimental safety of the students.
All working power supplies are isolated from network voltage and working power
supply use on-ground system.
2£®Digital three-phase
adjustable AC voltage regulator power supply£¨DG-2 series£©, voltage regulating
scope 0-240V, voltage regulating accuracy 2%, rated output current 1.5A, with
over current protection function and computer ports. When AC voltage regulating
power supply is over loaded, it immediately cuts off power supply output and at
the same gives over current alarming indication. Restored and then restarted.
3£®Unique AC voltage regulating power supply design
guarantees direct short circuit at max. AC voltage output will not damage experimental
equipments.
4£®System power supply controlled by key on-off, facilitating daily
management of the lab.
5£®Perfect combination of comprehensibility and flexibility.
6£®24 basic choosing schemes through flexible module collocations.
Power
supply master control screen and all functional modules are carefully designed,
all modules of measuring meters, loads, power supply series£¨voltage regulating
source, signal source and current regulating source etc.£©can be purchased optionally
by all schools according to experimental demands and flexibly collocated.
7£®All functional module convenient to dismantle, parts
not necessary in the experiments can be taken off and put away in special storage
cabinet fixed with the experimental equipment, facilitating management of experimental
equipment.
Experimental objects visible operation, no more are only signs
without practicalities£»experimental objects can be designed freely by students
themselves.
8£®Double stresses on advancedness and
practicability£º
All measuring meters have over measuring range protection function,
special circuit design enabling instruments to have very high ability of anti-impact;
through high voltage input into current meter will not cause damages.
9£®All
measuring instruments cancel traditional key on-off to switch measuring range,
realizing intelligentization and having double communication functions of computers,
meters controlled by data of micro-computer monitoring and measuring instruments.
10£®Signal
system, power supply system, instrument system and variable load are all program
controllable, setting hardware base for CAI introduction. | Main
Technical Index£º
Working power supply£ºthree-phase four-wire 380V AC power supply,
frequency 50HZ.
Power of input power supply£º1.5KVA
Dimension of the whole
set£ºLength700¡ÁWidth600¡ÁHeight500£¨mm£©
Insulation Resistance£ºmore than 5M¦¸. | For
actual requirements of the schools on equipment performance needed, electric equipment
of our company has the following merits£º
The new
generation of electric technique experimental equipment£¨DG-1A£©accords with requirements
of open experiment teaching. Design of the whole set is carefully done on instrument
series, source series£¨including AC power supply, voltage regulator source, current
regulating source and signal source£©, stressing program control and high credible
protection functions.
Open structure of all experimental objects, with visibility.
Personal all-round protection system of the equipment
use current type protection£¨30mA£¬0.1S£©on the primary side of insulation transformer
and voltage type creepage protection£¨50V action voltage£©on assistant side of insulation
transformer, which are somehow different from two voltage type creepage protection
systems inside and outside the insulation transformer. According to national standards,
only current type of creepage protection is personal protection in deed. What's
more, inside and outside creepage protections are all voltage type can result
in voltage protection signals coming all from cage, it will also make primary
side and assistant side of insulating transformer have relations on aspect of
electrics and disable the insulation functions.
Voltage
regulator source£¨0-30V£©£ºno shifts of regulating, facilitating the experiments.
Output current£¨0.5A£©, far above requirements of the experiments. And it is digital
display index, more direct than pointer type. All operations can be switched between
program control and manual control, set hardware base of computer control in the
future.
Current regulating source£¨0-250mA£©£ºno shifts of regulating, max. output
voltage 20V, with output current indication and current regulating indication,
greatly larger than the actual requirements, able to meet demands of large current
experiments of the schools in the future. All operations can be switched between
program control and manual control, set hardware base of computer control later
on.
Intelligent control signal source£ºoutput index£¨1HZ-1MHZ£©£¬with digital
display for output frequency. Use wave shape generator integrated block as core
part, providing great guarantee to wave shape quality output in high frequency£¨above
500KHZ£©, having ideal experimental results. It also exceeds requirements of actual
functions. All operations can be switched between program control and manual control,
set hardware base of computer control in the future.
Meters use digital display
modes. With computer bus serial port communication function. Able to be switched
between program control and manual control. On meter design, it considers the
importance of the selection of measuring range. Meter measuring range does not
use automatic switch modes, while by changing switch modes of direct keys, setting
hardware base of computer control in the future. |
IV
DKSZ-3 Type Electric, Electronic & Electric Driving Experimental Equipment£º | | | DKSZ-3
type motor control experimental equipment is a new generation of experimental
equipment promoted by our company on the base of two types of experiment equipments
such as DKSZ-1 and DSZ-1, absorbing merits of domestic and overseas products of
the same kind and taking full consideration of different teaching characteristics
of motor pull experiments, motor control experiments, electric and electronic
experiments, automatic control experiments and plant power supply experiments.
Through various combination of experimental parts, it can accomplish¡¶motor control
system experiment¡·, ¡¶motor pull experiment¡·, ¡¶electric & electronic experiment¡·,
¡¶automatic control experiment¡· and ¡¶plant power supply experiment¡·. | Product
Characteristics £º
1£®Master control screen of DK01
has the following functions£º£¨1£©provide three-phase four-wire AC voltage regulator
output power supply. Use three-phase combined adjusting autotransformer, combined
adjusting output can produce three-phase line voltage 0-420V AC power supply and
three single-phase line voltage 0-240V AC power supply, which is used in motor
pull experiments£¨2£©Provide three-phase line voltage of 200V and 230V AC power
supply, which is used in motor control and electric & electronic experiments£¨3£©Over
two-way power supply use selection switch to select to meet demands of different
experiments.£¨4£©Left side of the master control screen outputs 220V three-phase
special power supply, used together with motor test platform in motor experiments.£¨5£©Three-phase
AC power supply is fixed with three-phase current transformer, providing signals
for current feedback and over current protection, also with current type creepage
protection system£¨on the left side of experimental screen£©and voltage type creepage
protection system£¨on the panel of master control panel£©. £¨6£©Provide 2 groups of
trigger pulse£¨width adjustable£©used separately in two group of controllable silicon.
And also provide two ways of controllable silicon£¨KP5A800V and KP5A1300V£©. £¨7£©On
master control screen fixed with alarming times display, able to completely record
alarming times of the experiments and with examination function.
2£®Motor experiment
table D01 is the core parts of motor pull experimental equipment, with the following
characteristics£º£¨1£©provide motor orbit and dynamometer system, speed measuring
generator, 220V DC voltage regulator power supply, armature resistance and motor
excitation resistance etc. £¨2£©Unique power measuring circuit of vortex dynamometer
can stably test the complete M-S curve of the motor,£¨able to make tested motor
run stably in the unstable region£©.£¨3£©All experiments on aspect of motor pull
can all be accomplished on this experiment table.£¨4£©220V DC voltage regulator
power supply uses high frequency switch circuit with stable performance and short
circuit protection function. Voltage regulating 170V-240V£¬rated current 1.7A. | Main
Technical Index£º
Working power supply£ºthree-phase four-wire 380V AC power supply,
frequency 50HZ.
Power of input power supply£º1.5KVA
Dimension of the whole
set£ºLength1800¡ÁWidth720¡ÁHeight1600£¨mm£©
Insulation Resistance£ºmore than 5M¦¸. |
| V
ZK-1 Type Automatic Control Theory Experimental System£º | | I
Basic Type
Automatic
Control Theory Experimental Equipment is developed
for the course of Automatic Control Theory (classical control part). It can accomplish
the experiment of traditional automatic control theory, namely silulate typical
parts by composite network method and it accords with education outline requirement
of Automatic Control Theory (classical control part). It can be used in the experiment
course of Automatic Control Theory ( classical part) for junior colleges and technical
secondary schools.
£¨1£©Experiment Projects
Automatic Control
Theory Experimental Equipment can accomplish the following experiments£º
Analog experiment of typical parts
Transient
response and its stability analysis of control system
Measuring of frequency
characteristics
Analog research of series correction of linear system
Simulation
of typical nonlinear links
£¨2£©Basic Setup
a£® When
fixed with outer single-phase 220V AC power supply, automatic control theory experimental
system can provide +/£15V power supply.
b£® Experimental system provides a step
signal output, whose amplitude value can be adjusted by potentiometer. Amplitude
value is indicated by voltmeter head of the panel. Push the pulse button and switch
to negative step output, release it and switch to positive step output.
Automatic
control theory experimental system provides 8 units of movement amplifiers, resistor
capacitor unit of each can be used by that movement amplifier only other than
any other amplifiers. Experimental system also provides a sole unit of resistor
capacitor unit which can be used by all movement amplifiers. Other experimental
system provides two 47K and four 2.2K multi-loop potentiometer, for nonlinear
experiments' use.
£¨3£©Experimental Equipments and Instruments
a£® Automatic
control theory experimental system
b£® Low frequency signal generator£¨outer
setup£©
c£® Low frequency double oscilloscope£¨outer setup£© | II
Reinforced Type
Reinforced type automatic control
theory experimental system adds computer emulation experiment on the basis of
the former experimental system to satisfy demands of modern education.
Hardware
Setup£º
The reinforced type of automatic control theory experimental system
should fix an additional data acquisition card and a channel board. Its hardware
is supplied by professional producer thus has stable and credible performance.
Data acquisition cards of the hardware are ISA and PCI port two types, directly
plug in the slot of the computer.
Below are setup requirements on the computer£º
CPU£ºabove
PII233
EMS memory£ºabove 32M
Mainboard£ºa PCI or ISA slot should be reserved.
CD-ROM£ºabove
8X time speed
Operating system£ºWINDOWS95/WINDOWS98
£¨2£©Software Description£º
Automatic
control theory experimental system software is co-developed by our company and
Zhejiang University Electric Engineering Institute. The software has simple setup
and convenient operation. It can accomplish the following functions£ºable to real-time
track input and output waveshape in the experiments and print experiment curve.
Specific experiments are as follows£º
a£®Computer emulation experiment of typical
parts, including first-order, second-order and third-order system, and the second
and third also able to display performance index of transitional response among
it.
b£®Computer emulation experiment of linetype system
serial correction, able to compare curves before correction and after correction.
c£®Computer
emulation experiment of typical nonlinear parts. Through emulation you can obtain
characteristic curve of nonlinear parts.
d£®When fixed with computer assistant
teaching software, besides having emulation software, it also has real-time monitoring
and testing functions of experimental data, recording wave shapes and data of
all experiments and conducting data and waveshape analysis on this base. With
data acquisition system and relevant software fixed, no outer instruments and
oscillograph are needed. | Main Technical Index£º
Working
power supply£º220V AC power supply, frequency 50HZ.
Dimension of the whole set£ºLength394¡ÁWidth401¡ÁHeight120£¨mm£©
Insulation
Resistance£ºmore than 5M¦¸. |
| VI
TX-1 Type Communication Elements Experimental System£º | | ¡¶Communication
Elements¡·and ¡¶Communication System¡·are basic courses of information engineering
major and communication engineering major. The course has extensive content and
some concepts are quite abstract. The establishment of communication elements
experiments deepens students' understanding on basic concepts of communication
elements. However, traditional communication elements experiment uses small-scaled
integrated circuit basically and even uses a lot of discrete components to design
experiments. Discrete circuit cabling is very difficult to reach technical index
of the experiments and experiment contents are also difficult to update. Use EPLD
components to accomplish some comminication elements experiments can make up above
shortcomings.
This experiment uses advanced ALTERA
large-scaled programmable logic components and development system as experiment
platform
Every experiment has simpplified schematic
input and HDL language input functions etc, able to satisfy design test in the
course of experiment and demands on logic phantom and sequence phantom etc.
Experiment
board has signal source and signal interfaces with it which can be set up by oneself. | Experiment
Projects
Main Experiment Contents£º
1¡¢Design of clock generator
and pseudo random code generator
2¡¢HDB3 coding and decoding
3¡¢Differential
coding and decoding, coding disturbing and anti-disturbing
4¡¢PCM sequence generator
and PCM integrated coding
5¡¢Coding correction elements
6¡¢BPSK and QPSK modulator
elements |
|
